wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wjlafrance
Jun 18, 02:34 AM
Awesome. I know two developers (actually, the iPhone teachers at my college) who went, but were interested in multiple sessions running at the same time. This made their day.
Looks like Apple made it clear to me what size iPad they want me to buy. :)
Looks like Apple made it clear to me what size iPad they want me to buy. :)
mnkeybsness
Jun 29, 12:08 PM
Originally posted by Bond007
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
Brian Wilson - Explore The
more...
MLB player Brian Wilson
Brian Wilson, Cody Ross and
more...
Brian Wilson Brian Wilson #38
NT. Celebrity
more...
Brian Wilson Double Parked His
Brian Wilson#39;s beard.
more...
Gallery | rian wilson mlb
San Francisco#39;s Brian Wilson.
more...
Who Is The Better Brian Wilson
#38 Brian Wilson Black
more...
Gallery | rian wilson mlb
Previous Reliever Brian Wilson
more...
Brian Wilson - San Francisco
#38 Brian Wilson Cream
Baseball, Brian Wilson, MLB,
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
Dreadnought
Nov 14, 03:16 PM
O by the way Dreadnought. I plan on passing you! I have had one work unit turned in on my mac pro now it was worth 700 points and it took 22 hours. I have also lost a work unit which gaves errors(this was before the SMP client when public beta) However I have one sitting on my computer at home finished, I just found out how to upload it. I had a configuration thing set wrong. And I will have another one done by the end of today. :) I will catch up pretty fast with your current output. ;)
So when are you planning on doing this? Don't see anywhere in the top 100 :p
and my G5 gets a bit of a rest instead of folding 24/7. It uses a lot of power and am trying to cut down my electric bill.
So when are you planning on doing this? Don't see anywhere in the top 100 :p
and my G5 gets a bit of a rest instead of folding 24/7. It uses a lot of power and am trying to cut down my electric bill.
more...
nednarm
Apr 1, 12:57 PM
I can't figure this one out. I successfully jailbroke my 1st gen iPad after using pwnage tool and tetheredboot.
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
GLS
Apr 23, 08:05 PM
You can eventually control the alien mothership in space with 64GB of RAM.
Jeff Goldblum brought down an entire alien fleet with less than 64GB.....
http://d2o7bfz2il9cb7.cloudfront.net/main-qimg-1996deb31129c1d6595d9b6ca1d722f0
Jeff Goldblum brought down an entire alien fleet with less than 64GB.....
http://d2o7bfz2il9cb7.cloudfront.net/main-qimg-1996deb31129c1d6595d9b6ca1d722f0
more...
jaekyon
Dec 12, 10:30 PM
I successfully JB'd my ipod, but when I reboot it, it's stuck on the apple logo.
How can I turn it off so that I can run redsn0w again?
How can I turn it off so that I can run redsn0w again?
ErikAndre
Jan 14, 11:31 AM
Sorry, but I'll be checking in on the rumour sites during the show. delayed gratification is one thing, but, i won't be able to wait.
Well, I originally was supposed to go, but my travel buddy bailed out and now I can't go... i wanted to be there, but alas... it was too good to be true.
The next best thing is to watch the keynote 12+ hours later (and pretend it were live).
Well, I originally was supposed to go, but my travel buddy bailed out and now I can't go... i wanted to be there, but alas... it was too good to be true.
The next best thing is to watch the keynote 12+ hours later (and pretend it were live).
more...
Goohfy
Apr 22, 11:57 PM
Apple will probably keep the same pricing scheme. But no one knows for sure.
Thanks for lettin' me know, just wonderin' because I'm thinkin about upgradin from my Dell laptop.
Thanks for lettin' me know, just wonderin' because I'm thinkin about upgradin from my Dell laptop.
DJsteveSD
Mar 11, 10:08 PM
the manager stated that she was doing according to corporate. I find that hard to believe as it was a fraked up mess. really? can they not manage inventory any better than "youre in a gray area and might not have the model you wanted" what she meant was go home loser.
more...
CW Jones
Jan 2, 10:56 PM
I'll only comment on one thing I noticed... lots of awkward an trapped negative space. Like the upper right hand corner is all just trapped negative space which doesn't flow at all.
rorschach
Mar 24, 02:17 PM
Yes, it's possible that some major new features will be introduced between now and the final shipping version.
Leopard was first demoed in June shipped in October 2007. The revised Finder, new Dock and menubar weren't announced until June 2007...same for Stacks, Back To My Mac, Cover Flow, and Quick Look.
Leopard was first demoed in June shipped in October 2007. The revised Finder, new Dock and menubar weren't announced until June 2007...same for Stacks, Back To My Mac, Cover Flow, and Quick Look.
more...
sleepykidd
Apr 23, 08:01 AM
Yes, I did the same for my flatmate's 1st gen MacBook whose drive is also bust.
I'm not sure if this can be done without any problems.
Ok so here is plan B in effect:
Got the retail disc on the way, going to erase my flash drive and put the retail image on that drive. Once I boot from it I'll erase the 1,1's HDD and do a clean install.
Hopefully that works.
I want to thank everyone for their input so far it's been very helpful.
I'm not sure if this can be done without any problems.
Ok so here is plan B in effect:
Got the retail disc on the way, going to erase my flash drive and put the retail image on that drive. Once I boot from it I'll erase the 1,1's HDD and do a clean install.
Hopefully that works.
I want to thank everyone for their input so far it's been very helpful.
GGJstudios
May 5, 07:27 PM
Have you tried a PRAM and/or SMC reset already?
PRAM/NVRAM has nothing to do with the OP's issue.
Mac OS X: What's stored in PRAM (http://support.apple.com/kb/HT1242)
When to reset NVRAM or PRAM (http://support.apple.com/kb/HT1895)
SMC might help with some fan, unexpected power-offs or slow performance issues, but not heat-related shutdowns, as the OP described.
Intel-based Macs: Resetting the System Management Controller (SMC) (http://support.apple.com/kb/HT3964)
PRAM/NVRAM has nothing to do with the OP's issue.
Mac OS X: What's stored in PRAM (http://support.apple.com/kb/HT1242)
When to reset NVRAM or PRAM (http://support.apple.com/kb/HT1895)
SMC might help with some fan, unexpected power-offs or slow performance issues, but not heat-related shutdowns, as the OP described.
Intel-based Macs: Resetting the System Management Controller (SMC) (http://support.apple.com/kb/HT3964)
more...
flosseR
Mar 20, 06:07 PM
Right, I have been wondering of getting lenscoats for my lenses (at least the ones that I can get them for), not for camouflage but for actual protection. I have seen them in action and sometime the lenses just take a hit or two and that neoprene neatly takes the hit. They make them in black which is what suits me best. BUT the question is does anyone else use them? Are there alternatives since they are pretty pricey and from the looks not quite 100% fitting.
Someone also suggested camo form tape which also absorbs the hits, albeit less so, but is a helluva lot cheaper.
input?
Someone also suggested camo form tape which also absorbs the hits, albeit less so, but is a helluva lot cheaper.
input?
dylangurl21
Feb 29, 04:47 PM
Ha, I have been looking for one of these to try out ATT for a while and just got lucky enough to be signing on to MR when your post was at the top!
more...
macOSX-tastic
Sep 27, 06:38 AM
ah..that may cause a snag....i cant see anything about it in the agreement, but i guess its better to be safe than sorry....plus saving me �90 odd. :D
i guess i shall just have to use that mosterous gray cable.....connected to my beautiful powerbook!!!
tastic
i guess i shall just have to use that mosterous gray cable.....connected to my beautiful powerbook!!!
tastic
Mousse
Apr 20, 11:34 AM
I like multi-computer setup. I've got a dual boot (Linux, WinXP) desktop for internet (linux), ripping videos and various minor tasks, and games (XP). The MacBook does photo editing. Lots of times, I'm using both computers at the same time.
toxthexnines
Oct 26, 04:27 PM
im currently sitting in line waiting out front of the store:D
benhollberg
Apr 26, 04:03 PM
It is a viewer for PDF and such. Also allows you to take screen shots. Those are the two features I use most in Preview.
cluthz
Dec 16, 03:49 AM
Try starting your machine holding down option(alt) with the original startup CD and start "apple hardware test" it migth give you a clue.
Apple OC
Apr 30, 10:51 PM
as a rule ... if you are unsure ... do not delete them
arn
Nov 16, 02:47 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
Is the screenshot you posted an example of it being obtrusive?
Is the screenshot you posted an example of it being obtrusive?
tsteakuk
Mar 25, 09:12 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8F190 Safari/6533.18.5)
2.15pm got to be about 60+ people lining up now. 45 minutes till the Apple store closes for the Launch set up. People joining a lot heavier now but you still might be lucky!
2.15pm got to be about 60+ people lining up now. 45 minutes till the Apple store closes for the Launch set up. People joining a lot heavier now but you still might be lucky!
No comments:
Post a Comment